Filter
Top Products
For example, if you press Menu in the Copy area and the prompt delay time passes before
you press another button, the message "Press Menu for settings." appears on the
display.
To set the prompt delay time
1. Press Setup.
2. Press 7, then press 3.
This selects Preferences and then selects Set Prompt Delay Time.
3. Press
to select a delay time, then press OK.
You can choose Normal, Fast, Slow, or Off. If you select Off, hints do not appear
on the display but other messages, such as low ink warnings and error messages,
do still appear.
Restore the factory defaults
You can restore the current settings to what they were when you purchased the HP All-
in-One.
NOTE: Restoring the factory defaults will not affect any changes you made to scan
settings and the language and country/region settings. Personal settings and lists, for
example fax header, fax number, junk fax list, and speed dial list, that you have saved
will not be deleted when restoring the factory defaults.
You can perform this process from the control panel only.
To restore the factory defaults
1. Press Setup.
2. Press 6, then press 4.
This selects Tools and then selects Restore Factory Defaults.
The factory default settings are restored.
Fax preferences
This section contains the following topics:
•
Set up the HP All-in-One to redial a fax number automatically
•
Adjust the volume
•
Set tone or pulse dialing
•
Set the fax speed
Set up the HP All-in-One to redial a fax number automatically
You can set the HP All-in-One to redial a busy or an unanswered number automatically.
The default Busy Redial setting is Redial. The default No Answer Redial setting is No
Redial.
Set your preferences 21