HP (Hewlett-Packard) 5700J Printer User Manual


 
To set the number of rings before answering from the control panel
1. Press Setup.
2. Press 4, and then press 3.
This selects Basic Fax Setup and then selects Rings to Answer.
3. Enter the appropriate number of rings by using the keypad, or press
or to change
the number of rings.
4. Press OK to accept the setting.
Related topics
Set the answer mode
Change the answer ring pattern for distinctive ringing
Many phone companies offer a distinctive ringing feature that allows you to have several
phone numbers on one phone line. When you subscribe to this service, each number will
have a different ring pattern. You can set up the HP All-in-One to answer incoming calls
that have a specific ring pattern.
If you connect the HP All-in-One to a line with distinctive ringing, have your telephone
company assign one ring pattern to voice calls and another ring pattern to fax calls. HP
recommends that you request double or triple rings for a fax number. When the HP All-
in-One detects the specified ring pattern, it will answer the call and receive the fax.
If you do not have a distinctive ring service, use the default ring pattern, which is All
Rings.
To change the distinctive ring pattern from the control panel
1. Verify that the HP All-in-One is set to answer fax calls automatically.
2. Press Setup.
3. Press 5, and then press 1.
This selects Advanced Fax Setup and then selects Distinctive Ring.
4. Press
to select an option, and then press OK.
When the phone rings with the ring pattern assigned to your fax line, the HP All-in-
One answers the call and receives the fax.
Related topics
Set the answer mode
Test your fax setup
You can test your fax setup to check the status of the HP All-in-One and to make sure it
is set up properly for faxing. Perform this test after you have completed setting up the
HP All-in-One for faxing. The test does the following:
Tests the fax hardware
Verifies the correct type of phone cord is connected to the HP All-in-One
Checks that the phone cord is plugged into the correct port
Checks for a dial tone
Fax setup 47