Solution: Load your originals into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original on the glass.
To load an original in the document feeder tray
1. Load your original, with the print side up, into the document feeder tray. Slide the
paper into the automatic document feeder until you hear a beep or see a message
on the display indicating that the HP All-in-One detected the pages you loaded.
TIP: For more help on loading originals in the automatic document feeder,
refer to the diagram engraved in the document feeder tray.
2. Slide the paper guides inward until they stop at the left and right edges of the
paper.
NOTE: Remove all originals from the document feeder tray before lifting the lid
on the HP All-in-One.
To load an original on the scanner glass
1. Remove all originals from the document feeder tray, and then lift the lid on the
HP All-in-One.
2. Load your original print side down on the right front corner of the glass.
Chapter 12
184 Troubleshooting