Filter
Top Products
Chapter 5: EMX Device Management
100
Pinging a Host
The Ping tool is useful for checking whether a host is accessible through
the network or Internet.
To ping a host:
1. Choose Maintenance > Network Diagnostics > Ping. The Ping
Network Host dialog appears.
2. In the Host Name field, type the name or IP address of the host that
you want to check.
3. In the Number of Requests field, type a number up to 10 or adjust
the value by clicking either arrow. This number determines how
many packets are sent for pinging the host.
4. Click Run Ping to start pinging the host. A dialog appears, displaying
the Ping results.
5. Click Close to quit the dialog.
Tracing the Network Route
Trace Route lets you find out the route over the network between two
hosts or systems.
To trace the route for a host:
1. Choose Maintenance > Network Diagnostics > Trace Route. The
Trace Route to Host dialog appears.
2. Type the IP address or name of the host whose route you want to
check in the Host Name field.
3. Click Run. A dialog appears, displaying the Trace Route results.
4. Click Close to quit the dialog.
Listing TCP Connections
You can use the "List TCP Connections" to display a list of TCP
connections.
To trace the route for a host:
1. Choose Maintenance > Network Diagnostics > List TCP
Connections. The TCP connections dialog appears.
2. Click Close to quit the dialog.
Downloading Diagnostic Information
Important: This function is for use by Raritan Field Engineers or