Filter
Top Products
Chapter 7: Event Rules, Event Actions and Application Logs
142
7. In the Port field, specify an appropriate port number.
8. Click OK to save the new action.
9. Click Close to quit the dialog.
Send SMS Message
You can configure emails to be sent when an event occurs and can
customize the message.
Messages consist of a combination of free text and EMX placeholders.
The placeholders represent information is pulled from the EMX and
inserted into the message.
A supported modem, such as the Cinterion
®
GSM MC52i modem, must
be plugged in to the EMX in order to send SMS messges.
Note: The EMX cannot receive SMS messages.
For example:
[USERNAME] logged into the device on [TIMESTAMP]
translates to
JQPublic logged into the device on 2012-January-30
21:00
See Email and SMS Message Placeholders (on page 145) for a list
and definition of available variables.
To configure SMS message:
1. Choose Device Settings > Event Rules. The Event Rules Settings
dialog opens.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number based on how many actions are already created.
5. In the Action field, click the drop-down arrow and select the desired
action from the list.
6. In the Recipients Phone Number field, specify the phone number(s)
of the recipient(s). Use a comma to separate multiple phone
numbers.
7. Select the Use Custom Log Message checkbox, then create a
custom message in the provided field.