Filter
Top Products
Chapter 6: Security
108
Action
Procedure
Insert a rule between two
existing rules
Select the rule above which you want to insert a new rule. For
example, to insert a rule between rules #3 and #4, select #4.
Click Insert. The "Insert new Rule" dialog appears.
Type an IP address and subnet mask in the IP/Mask field.
Select Accept, Drop or Reject from the drop-down list in the Policy
field.
Accept: Accepts traffic from the specified IP address(es).
Drop: Discards traffic from the specified IP address(es), without
sending any failure notification to the source host.
Reject: Discards traffic from the specified IP address(es), and an
ICMP message is sent to the source host for failure notification.
Click OK to save the changes.
The system inserts the rule and automatically renumbers the following rules.
5. When finished, the rules appear in the Configure IP Access Control
Settings dialog.
6. Click OK to save the changes. The rules are applied.