Filter
Top Products
Chapter 6: Security
116
Action
Do this...
Type an ending IP address in the Ending IP Address
field.
Select a role from the drop-down list in the Role field.
This rule applies to members of this role only.
Select Allow or Deny from the drop-down list in the
Policy field.
Allow: Accepts traffic from the specified IP
address range when the user is a member of the
specified role
Deny: Drops traffic from the specified IP address
range when the user is a member of the specified
role
Click OK to save the changes.
The system inserts the rule and automatically renumbers the
following rules.
5. Click OK to save the changes.
Editing Role-Based Access Control Rules
You can modify existing rules when these rules do not meet your needs.
To modify a role-based access control rule:
1. Choose Device Settings > Security > Role Based Access Control.
The Configure Role Based Access Control Settings dialog appears.
2. To modify the IPv4 firewall rules, click the IPv4 tab. To modify the
IPv6 firewall rules, click the IPv6 tab.
3. Ensure the Enable Role Based Access Control for IPv4 checkbox is
selected on the IPv4 tab, or the Enable Role Based Access Control
for IPv6 checkbox is selected on the IPv6 tab.
4. Select the rule to be modified in the rules list.
5. Click Edit or double-click the rule. The Edit Rule dialog appears.
6. Make changes to the information shown.
7. Click OK to save the changes.