Filter
Top Products
Chapter 7: Event Rules, Event Actions and Application Logs
148
Placeholder
Description
[UMTARGETUSER]
The user, an action was triggered for
[USERIP]
The IP address, a user connected from
[USERNAME]
The user who triggered an action
[VERSION]
The firmware version the device is upgrading
to
[WIRESENSOR]
The wire sensor name
Default Log Messages
Following are default log messages triggered and emailed to specified
recipients when EMX events occur (are TRUE) or, in some cases, do not
occur (are FALSE). See Event Rules and Actions (on page 131) for
information configuring email messages to be sent when specified
events occur.
Event/Context
Default Assertion Message when
the Event = TRUE
Default Assertion Message
when the Event = FALSE*
Device > System started
System started.
Device > System reset
System reset performed by user
'[USERNAME]' from host '[USERIP]'.
Device > Firmware validation
failed
Firmware validation failed by user
'[USERNAME]' from host '[USERIP]'.
Device > Firmware update
started
Firmware upgrade started from version
'[OLDVERSION]' to version
'[VERSION]' by user '[USERNAME]'
from host '[USERIP]'.
Device > Firmware update
completed
Firmware upgraded successfully from
version '[OLDVERSION]' to version
'[VERSION]' by user '[USERNAME]'
from host '[USERIP]'.
Device > Firmware update
failed
Firmware upgrade failed from version
'[OLDVERSION]' to version
'[VERSION]' by user '[USERNAME]'
from host '[USERIP]'.
Device > Device identification
changed
Config parameter '[PARAMETER]'
changed to '[VALUE]' by user
'[USERNAME]' from host '[USERIP]'.