Filter
Top Products
Chapter 6: Security
114
2. To enable the IPv4 firewall, click the IPv4 tab, and select the Enable
Role Based Access Control for IPv4 checkbox.
3. To enable the IPv6 firewall, click the IPv6 tab, and select the Enable
Role Based Access Control for IPv6 checkbox.
4. Click OK to save the changes.
Changing the Default Policy
The default policy is to accept all traffic from all IP addresses regardless
of the role applied to the user.
To change the default policy:
1. Choose Device Settings > Security > Role Based Access Control.
The Configure Role Based Access Control Settings dialog appears.
2. To determine the default policy for IPv4 addresses:
a. Click the IPv4 tab if necessary.
b. Ensure the Enable Role Based Access Control for IPv4
checkbox is selected.
c. Select the action you want from the Default Policy drop-down list.
Allow: Accepts traffic from all IPv4 addresses regardless of
the user's role.
Deny: Drops traffic from all IPv4 addresses regardless of the
user's role.
3. To determine the default policy for IPv6 addresses:
a. Click the IPv6 tab.
b. Ensure the Enable Role Based Access Control for IPv6
checkbox is selected.
c. Select the action you want from the Default Policy drop-down list.
Allow: Accepts traffic from all IPv6 addresses regardless of
the user's role.
Deny: Drops traffic from all IPv6 addresses regardless of the
user's role.
4. Click OK to save the changes.