Filter
Top Products
Chapter 5: EMX Device Management
89
5. In the Community fields, enter the SNMP community string to access
the device(s). The community is the group representing the EMX and
all SNMP management stations.
6. Click OK.
For SNMPv3 TRAP and INFORM notifications:
1. On the Notifications tab, select the Enable checkbox to enable the
SNMP notification feature.
2. From the Notification Type drop-down, select the type of SNMP
notification.
3. For SNMP TRAPs, the engine ID is prepopulated.
4. For SNMP INFORM communications, leave the resend settings at
their default or:
a. In the Timeout (sec) field, enter the interval of time, in seconds,
after which a new inform communication is resent if the first is
not received. For example, resend a new inform communication
once every 3 seconds.
b. In the Number of Retries field, enter the number of times you
want to resend the inform communication if it fails. For example,
inform communications are resent up to 5 times when the initial
communication fails.
5. For both SNMP TRAPS and INFORMS, enter the following as
needed and then click OK to apply the settings:
a. Host name
b. Port number
c. User ID needed to access the host
d. Select the host security level