Filter
Top Products
Chapter 9: Using SNMP
206
a. In the Timeout (sec) field, enter the interval of time, in seconds,
after which a new inform communication is resent if the first is
not received. For example, resend a new inform communication
once every 3 seconds.
b. In the Number of Retries field, enter the number of times you
want to resend the inform communication if it fails. For example,
inform communications are resent up to 5 times when the initial
communication fails.
8. In the Host fields, enter the IP address of the device(s) you want to
access. This is the address to which notifications are sent by the
SNMP system agent. You can specify up to 3 SNMP destinations.
9. In the Port fields, enter the port number used to access the
device(s).
10. In the Community fields, enter the SNMP community string to access
the device(s). The community is the group representing the EMX and
all SNMP management stations.
11. Click OK.
SNMPv3 Notifications
To configure the EMX to send SNMPv3 notifications:
1. Choose Device Settings > Network Services > SNMP. The SNMP
Settings dialog appears.
2. Enter the MIB-II system group information, if applicable: