Filter
Top Products
Chapter 7: Event Rules, Event Actions and Application Logs
143
Click the Information icon to open the Event Context Information
dialog, which contains a list of placeholders and their definitions. See
Email and SMS Message Placeholders (on page 145) for more
details.
Note: Only English is supported for SMS messages. For Turkish
characters, use 7-bit ASCII instead.
8. Click OK to save the new action.
9. Click Close to quit the dialog.
Switch LHX
If Schroff LHX Support is enabled, this option is available. See Schroff
LHX Heat Exchangers (on page 192).
Use this action to switch the LHX on or off when, for example,
temperature thresholds are reached.
To create a switch LHX action:
1. Choose Device Settings > Event Rules. The Event Rules Settings
dialog opens.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number based on how many actions are already created.
5. In the Action field, click the drop-down arrow and select the desired
action from the list.
6. From the Option drop-down, select Turn LHX On or Turn LHX Off.
7. From the available LHXs box, click on the LHX to be turned on or off,
then click the Add arrow to add to the Switched LHXs box. Use the
Remove arrow to remove the LHX from the list, thereby removing the
action.
8. Click Close to quit the dialog.
9. Click OK to save the new action.
Record Snapshots to Webcam Storage
This option allows you to define an action that starts or stops a specific
webcam from taking snapshots.
To configure a record snapshot to webcame storage action:
1. Choose Device Settings > Event Rules. The Event Rules Settings
dialog opens.
2. Click the Actions tab.