Filter
Top Products
Chapter 10: Using the Command Line Interface
233
Setting the Z Coordinate Format for Environmental Sensors
This command syntax enables or disables the use of rack units for
specifying the height (Z coordinate) of environmental sensors.
config:#
emd externalSensorsZCoordinateFormat <option>
Variables:
<option> is one of the options: rackUnits or freeForm.
Option
Description
rackUnits
The height of the Z coordinate is measured in
standard rack units. When this is selected, you
can type a numeric value in the rack unit to
describe the Z coordinate of any environmental
sensors.
freeForm
Any alphanumeric string can be used for
specifying the Z coordinate.
Note: After determining the format for the Z coordinate, you can set a
value for it. See Setting the Z Coordinate (on page 283).
Example
The following command determines that the unit of rack is used for
specifying the Z coordinate of environmental sensors.
config:#
emd externalSensorsZCoordinateFormat rackUnits
Enabling or Disabling Data Logging
This command syntax enables or disables the data logging feature.
config:#
emd dataRetrieval <option>
Variables:
<option> is one of the options: enable or disable.
Option
Description
enable
Enables the data logging feature.
disable
Disables the data logging feature.