Filter
Top Products
Chapter 8: Managing External Devices
193
Naming a Heat Exchanger
To help identify an LHX heat exchanger in the EMX web interface,
assign a name to it. The customized LHX heat exchanger's name is
followed by the device type and RS-485 port number in parentheses.
The web interface provides two types of setup dialogs for naming a
specific LHX heat exchanger.
To name a heat exchanger using the Auxiliary Port Setup
dialog:
1. Connect the LHX heat exchanger to EMX if it is not already
connected.
2. If the EMX folder is not expanded, expand it to show all components.
Note: The EMX folder is named "EMX" by default. The name
changes after customizing the device name. See Naming the EMX
Device (on page 72).
3. Click the Auxiliary Ports folder. The Auxiliary Ports page opens in the
right pane, listing all RS-485 ports.
4. Select the port where the desired heat exchanger is connected on
the Auxiliary Ports page, and click Setup. Or simply double-click that
port. The Auxiliary Ports Setup dialog for the selected port appears.
5. Type a name for the heat exchanger in the Name field.
6. Click OK to save the changes.
To name a heat exchanger using the setup dialog for a heat
exchanger:
1. If the Auxiliary Ports folder is not expanded, expand it to show all
devices connected to the RS-485 ports.
2. Click the desired heat exchanger in the EMX Explorer pane. The
page specific to that heat exchanger opens in the right pane.
3. Click Setup in the Settings section.
4. Type a name for the heat exchanger in the Name field.
5. Click OK to save the changes.