Filter
Top Products
Chapter 7: Event Rules, Event Actions and Application Logs
144
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number based on how many actions are already created.
5. In the Action field, click the drop-down arrow and select the desired
action from the list.
6. Select a webcam from the Webcam drop-down.
7. Selecting the action to perform - Start Recording or Stop Recording.
8. Use the slide bar to specify the total number of snapshots to be
taken when the event occurs. The maximum amount of snapshots
that can be stored on the EMX is ten (10). If you set it for a number
greater than ten, after the tenth snapshot is taken and stored, the
oldest snapshots are overwritten.
9. In the "Time before first Snapshot (s):" field, use the slide bar or
enter the amount of time (in seconds) between when the event is
triggered and the webcam begins taking snapshots.
10. In the "Time between Snapshots (s):" field, use the slide bar or enter
the amount of time between when each snapshot is taken.
11. Click OK to save the new action.
12. Click Close to quit the dialog.