Filter
Top Products
Chapter 5: EMX Device Management
80
7. In the Authentication field, click the drop-down arrow, and select an
appropriate option from the list.
Option
Description
No Authentication
Select this option when no authentication data is
required.
PSK
A Pre-Shared Key is required for this option.
In the Pre-Shared Key field, type the PSK
string.
EAP - PEAP
PEAP stands for Protected Extensible
Authentication Protocol.
The following authentication data is required:
Inner Authentication: Only Microsoft's
Challenge Authentication Protocol Version 2
(MSCHAPv2) is supported, allowing
authentication to databases that support
MSCHAPv2.
Identity: Type your user name for EAP
authentication.
Password: Type your password for EAP
authentication.
CA Certificate: A third-party CA certificate
must be provided for EAP authentication.
Click Browse to select a valid certificate file.
- To view the contents of the selected
certificate file, click Show.
- If the selected certificate file is invalid, click
Remove. Then select a new file.
8. Click OK to save the changes.
Modifying the Network Settings
The EMX was configured for network connectivity during the installation
and configuration process. See Configuring the EMX (on page 11). If
necessary, you can modify any network settings using the web interface.