Filter
Top Products
Chapter 10: Using the Command Line Interface
251
Option
Description
10Mbps
The LAN speed is always 10 Mbps.
100Mbps
The LAN speed is always 100 Mbps.
Example
The following command lets the EMX determine the optimal LAN
interface speed through auto-negotiation.
config:#
network interface LANInterfaceSpeed auto
Changing the LAN Duplex Mode
This command syntax determines the LAN interface duplex mode.
config:#
network interface LANInterfaceDuplexMode <mode>
Variables:
<mode> is one of the modes: auto, half or full.
Option
Description
auto
The EMX selects the optimum transmission mode
through auto-negotiation.
half
Half duplex:
Data is transmitted in one direction (to or from the
EMX device) at a time.
full
Full duplex:
Data is transmitted in both directions
simultaneously.
Example
The following command lets the EMX determine the optimal transmission
mode through auto-negotiation.
config:#
network interface LANInterfaceDuplexMode auto
Setting the Network Service Parameters
A network service command begins with network services.