Filter
Top Products
Chapter 10: Using the Command Line Interface
269
config:#
security userBlocking maximumNumberOfFailedLogins <value1>
To determine how long a user's login is blocked, use this
command syntax:
config:#
security userBlocking blockTime <value2>
Variables:
<value1> is an integer between 3 and 10, or unlimited, which sets no
limit on the maximum number of failed logins and thus disables the
user blocking function.
<value2> is a numeric value in minutes.
Tip: You can combine multiple commands to modify the user blocking
parameters at a time. See Multi-Command Syntax (on page 320).
Example
The following command sets up two user blocking parameters.
config:#
security userBlocking maximumNumberOfFailedLogins 5 blockTime 30
Results:
The maximum number of failed logins is set to 5.
The user blocking time is set to 30 minutes.
Strong Passwords
The strong password commands determine whether a strong password
is required for login, and what a strong password should contain at least.
A strong password command begins with security
strongPasswords.
You can combine multiple strong password commands to modify
different parameters at a time. See Multi-Command Syntax (on page
320).