Filter
Top Products
Appendix C: Raritan PX Asset Management
350
To set up an asset management system:
Affix the adhesive end of an asset tag to each IT device
through the tag's tape.
Plug the connector on the other end of each asset tag into the
corresponding tag port on the asset sensor.
Connect the asset sensor assembly on the rack to the
Dominion PX device.
a. Connect one end of the Category 5e/6 UTP cable to the
RJ-45 connector on the asset sensor.
b. Connect the other end of the cable to the FEATURE port
on the Dominion PX device.
For more information on the Dominion PX product, see the Dominion PX
documentation that accompanies the Dominion PX device, which can be
downloaded from the Raritan website's Firmware and Documentation
section (http://www.raritan.com/support/firmware-and-
documentation/). Or you can access the product's online help in the
Product Online Help section (http://www.raritan.com/support/online-
help/).