Filter
Top Products
Chapter 10: Using the Command Line Interface
258
Setting the sysName Value
This command syntax sets the SNMP MIB-II sysName value.
config:#
network services snmp sysName <value>
Variables:
<value> is a string comprising 0 to 255 alphanumeric characters.
Example
The following command sets the SNMP MIB-II sysName to
"Win7_system"
config:#
network services snmp sysName Win7_system
Setting the sysLocation Value
This command syntax sets the SNMP MIB-II sysLocation value.
config:#
network services snmp sysLocation <value>
Variables:
<value> is a string comprising 0 to 255 alphanumeric characters.
Example
The following command sets the SNMP MIB-II sysLocation to
"New_TAIPEI"
config:#
network services snmp sysLocation New_TAIPEI
Security Configuration Commands
A security configuration command begins with security.