Filter
Top Products
Chapter 10: Using the Command Line Interface
278
config:#
security roleBasedAccessControl ipv4 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip>
To modify an IPv4 rule's role, use this command syntax:
config:#
security roleBasedAccessControl ipv4 rule modify <rule_number> role
<role>
To modify an IPv4 rule's policy, use this command syntax:
config:#
security roleBasedAccessControl ipv4 rule modify <rule_number> policy
<policy>
To modify all contents of an existing IPv4 rule, use this
command syntax:
config:#
security roleBasedAccessControl ipv4 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip> role <role> policy
<policy>
IPv6 commands
To modify a rule's IPv6 address range, use this command
syntax:
config:#
security roleBasedAccessControl ipv6 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip>
To modify an IPv6 rule's role, use this command syntax:
config:#
security roleBasedAccessControl ipv6 rule modify <rule_number> role
<role>
To modify an IPv6 rule's policy, use this command syntax: