Filter
Top Products
Paper and Other Media
48
3
D
DD
D
Push the bottom plate down until
it locks into place.
E
EE
E
Load envelopes into the Envelope
Feeder Unit, with the print side
down and the flap on the left as
shown in the illustration.
Important
❒ Confirm that the envelope flaps
are securely folded down, and
that there is no air inside the en-
velopes.
Note
❒ Confirm that the top of the stack
is not higher than the limit mark
on the side guides.
❒ Confirm that the envelopes fit
under the side guides.
❒ Do not push the stack of enve-
lopes with too much force.
F
FF
F
While pinching the side guides,
slide them along the edge of the
envelope stack.
G
GG
G
While pinching the rear guide,
slide it along the edge of the enve-
lope stack.
H
HH
H
While lifting the front of the tray,
place it into the printer. Then
slide it until it stops.
Important
❒ Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
ZDDP360E
ZDDP380E
ZGDY370E
ZGDY390E