Filter
Top Products
Appendix
116
7
IPP job canceled. jobid=%d. The spooled job has been canceled due to an
error or by user request.
job canceled. jobid=%d. The spooled job has been canceled due to an
error or by user request.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
The resource lease time that was received from
the DHCP server is <lease time> in seconds.
The renewal time is also <renew time> in sec-
onds.
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
(In print server mode) Logged in to the file
server with NDS or BINDERY mode.
multid start. Data transmission service for multiprotocols
has started.
nbstart start. (NetBEUI) The service for NetBEUI protocol stack setting
has started.
NBT Registration Broadcast(<NetBIOS
name>)
Use a local broadcast to map <NetBIOS name>
with the IP address.
nbtd start. A nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
NetBEUI Computer Name =<computer
name>
The NetBEUI Computer Name is defined as
<computer name>.
nmsd start. (NetBEUI) A nmsd (Name Server Daemon) has started.
npriter start. (NetWare) (In remote printer mode) NetWare service has
started.
nwstart start. (NetWare) The service for NetWare protocol stack setting
has started.
Open log file <file name> (In print server mode) The specified log file
has been opened.
papd start. (AppleTalk) AppleTalk print service has started.
permission denied. Job cancellation was determined to be unau-
thorized after checking the user name and host
address (except for ROOT authorization).
phy release file open failed. Replacing the Network Interface Board is re-
quired. Contact your sales or service repre-
sentatives.
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
(In print server mode) The print queue name
cannot be serviced. Make sure that print queue
volume exists on the specified file server.
Print server <print server name> has no print-
er.
(In print server mode) The printer object is not
assigned to the print server <print server
name>. Using NWAdmin, assign the printer
object, and then restart the printer device.
Print session full Cannot accept the print session.
Message Description and Solutions