Filter
Top Products
Windows 95/98/Me Configuration
10
1
Setting Up a Client Computer
This section describes the procedures for setting up a client on a network that
uses Windows 2000, Windows XP, Windows NT Server or Windows NT Work-
station as a print server.
When using a Windows 2000, Windows XP or Windows NT print server, select
a shared printer on Windows 2000, Windows XP or Windows NT.
Limitation
❒ When using a print server connected to the printer with SmartNetMonitor for
Client, you cannot use Recovery Printing and Parallel Printing.
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000, Windows XP or Windows NT print server. Do not
begin the following procedure until the client has been set up and configured
correctly.
A
AA
A
Install the printer driver as a local printer.
Reference
For more information about installing the printer driver, see the Setup
Guide.
Note
❒ Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
BB
B
Click [Start], point to [Settings], and then click [Printers].
C
CC
C
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties].
Windows 2000, Windows XP or
Windows NT Print Server
Windows 95/98/Me