Filter
Top Products
37
4. Windows NT 4.0
Configuration
Configuring Windows NT 4.0
Printing without a Print Server
The following procedure describes how to configure Windows NT 4.0 to use the
machine on a network without a Windows 2000, Windows NT Server, Windows
NT Workstation or NetWare based print server.
A
AA
A
Specify the protocol to use
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
B
BB
B
Configure the chosen protocol.
• See p.38 “Configuring TCP/IP and IPP for Printing”.
• See p.39 “Configuring NetBEUI for Printing”.
C
CC
C
Install the software and set the printer driver port
• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer
Drivers and Utilities". For more information about how to install the soft-
ware and how to specify the printer driver port, see the Setup Guide.
Printing with a LPR Port
See p.46 “Configuring LPR Port Printing” for how to configure a LPR port in
Windows NT 4.0.
Printing with a Windows 2000 or Windows NT Print Server
See p.47 “Setting Up a Client Computer” for configuring Windows NT 4.0 with
a Windows 2000 or Windows NT print server.