Filter
Top Products
Appendix
94
7
❖
❖❖
❖ Changing the Interface
You can specify either the LAN interface or IEEE 802.11b interface when us-
ing the optional 802.11b Interface Unit.
msh> ifconfig interface up
Note
❒ You cannot specify the optional IEEE 1394 Interface Unit.
The following is an example for configuring an IP address of 192.168.15.16 on
Ethernet interface.
msh> ifconfig ether 192.168.15.16
The following is an example for configuring a subnet mask of 255.255.255.0 on
Ethernet interface.
msh> ifconfig ether netmask 255.255.255.0
Note
❒ This affects the configuration of the Network Interface Board of the IP ad-
dress that is used.
❒ The TCP/IP setting is the same as that for the LAN interface and IEEE 802.11b
interface.
❒ To type an address using hexadecimal, prefix it by “0x”.
-
--
-Address
❖
❖❖
❖ Subnet Mask
A number used to mathematically “mask” or hide the IP address on the net-
work by eliminating those parts of the address that are alike for all the ma-
chines on the network.
Note
❒ To get the above addresses, contact your network administrator.
❒ The subnet mask is the same as that for the LAN interface and IEEE 802.11b
interface.
❒ When installing the optional 1394 Interface Unit, set the subnet so that it does
not overlap with the LAN interface or the 1394 interface.