Ricoh AP2610N Printer User Manual


 
Envelope Feeder Type 2600
17
2
Envelope Feeder Type 2600
Note
This unit is a tray that slides into
the optional Paper Feed Unit.
Without the optional Paper Feed
Unit, this Envelope Feeder cannot
be used.
Your printer can have two optional
Paper Feed Units. However, the
Envelope Feeder must be used in
the top-most optional Paper Feed
Unit (Tray 2). It cannot be used in
the bottom-most optional Paper
Feed Unit (Tray 3).
Important
Do not slide more than one paper
tray out at the same time. Having
more than one paper tray filled
with paper in a fully extended po-
sition could cause the machine to
fall down.
A
AA
A
Check the contents of the box for
the following items:
Envelope Feeder
Installation Guide
B
BB
B
Pull out the second paper tray
(Tray 2) of the optional Paper
Feed Unit until it stops. After that,
lift it slightly, and then pull it out.
Important
The Envelope Feeder must be
used in the top-most optional
Paper Feed Unit (Tray 2).
The tray of the top-most option-
al Paper Feed Unit is beneath
the paper tray.
Note
Keep the paper tray with paper
in a cool dark place.
C
CC
C
While lifting the front side of the
Envelope Feeder, place the feeder
into the printer. Then slide it into
the printer until it stops.
Reference
For information about loading pa-
per, see "Loading Envelopes" in the
Printer Reference on the CD-ROM
labeled "Operating Instructions".
ZDDP330E
ZDDP340E