Filter
Top Products
iii
This manual contains detailed instructions on configuring the machine as a net-
work printer. Read the section appropriate to your network environment on
how to configure the machine correctly.
Important
❒ The procedures written in this manual assume that you are a network admin-
istrator. If you are not, be sure to consult your network administrator before
configuration.
Reference
For more information about configuring the Network Interface Board with
the control panel, see the Setup Guide.
❖
❖❖
❖ Features
• Support for 100BASE-TX, 10BASE-T, IP over 1394 and IEEE 802.11b.
• The Network Interface Board is compatible with NetWare
*1
(IPX/SPX,
TCP/IP), Windows NT 4.0 (TCP/IP, NetBEUI
*2
, IPP
*3
), Windows 2000
(TCP/IP, NetBEUI
*2
, IPP
*3
), Windows XP (TCP/IP, IPP
*3
), Windows
95/98/Me (TCP/IP, NetBEUI
*2
, IPP
*3
), UNIX (TCP/IP) and Macintosh
(AppleTalk) protocols. This allows you to use the machine in a network
that uses different protocols and operating systems.
• A computer used as a dedicated print server is not required because the
Network Interface Board can be configured as a NetWare print server.
• The Network Interface Board can connect the machine to the network
without requiring its own power supply because the Network Interface
Board is installed inside the machine.
NetWare (Server)
Windows NT (Server)
Windows 2000, Windows XP,
Windows 95/98/Me
Macintosh
Windows NT
NetWare
(Client)
Windows XP
Windows 2000
UNIX