Filter
Top Products
Troubleshooting
62
5
Close
Front Cover
The front cover is open. Close the front cover.
Close Rear/Paper
Exit Cover
The paper exit cover or the
rear cover is open.
Close the paper exit cover or
the rear cover.
Close
Mailbox Cover
The cover of the Mailbox is
open.
Close the cover of the Mail-
box.
Close Upper
Tray Cover
The cover of the output 1-bin
Tray is open.
Close the cover of the output
1-bin Tray.
Energy Save Mode The printer is in Energy Saver
mode.
Wait for a while.
Hardware Problem DIM An error has occurred in the
printer.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Hardware Problem
Ethernet
An error has occurred in the
optional Network Interface
Board.
First, turn off the power
switch and then on. If the mes-
sage appears again, call your
sales or service representative.
Turn off the power switch .
Replace the Network Interface
Board and turn on the power
switch. See “Network Interface
Board Type 2610” in the Setup
Guide.
Turn off the power switch, re-
move the Network Interface
Board and turn on the power
switch.
Note
❒ If you remove the Net-
work Interface Board, you
cannot print over the net-
work. You can send a print
jobs to the printer only via
a parallel cable connection.
Messages/Second messages Description Solution