Ricoh AP2610N Printer User Manual


 
Setting Up a Client Computer
23
2
Setting Up a Client Computer
This section describes the procedures for setting up a client in a network that
uses Windows 2000, Windows XP, Windows NT Server or Windows NT Work-
station as a print server.
When using a Windows 2000, Windows XP or Windows NT print server, select
a shared printer on Windows 2000, Windows XP or Windows NT.
Limitation
When using a print server connected to the printer with SmartNetMonitor for
Client, you cannot use Recovery Printing and Parallel Printing.
Note
This section assumes that the client has already been configured to communi-
cate with a Windows 2000, Windows XP or Windows NT print server. Do not
begin the following procedure until the client has been set up and configured
correctly.
Use the [Printers] window to set up the printer.
A
AA
A
Click [Start], point to [Settings] and then click [Printers].
B
BB
B
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
C
CC
C
Click [Next >].
D
DD
D
Click [Network printer], and then click [Next >].
E
EE
E
Click [Next >].
F
FF
F
In the [Shared printers:] box, double-click the name of the computer used as
a print server.
The printers attached to the network are displayed.
Windows 2000
Windows 2000, Windows XP or
Windows NT Print Server