Filter
Top Products
Quick Setup Using the NIB Setup Tool Wizard
51
5
Quick Setup Using the NIB Setup Tool Wizard
With the NIB Setup Tool, you can easily set up a NetWare printing environment.
Reference
For more information about installing the NIB Setup Tool, see p.49 “Installing
the NIB Setup Tool”.
You can select [Wizard] or [Property Sheet] as an installation method.
When you configure the Network Interface Board for the first time, use the Wiz-
ard method.
If you want to use the Property Sheet method, see p.54 “NetWare 3.x - Advanced
Settings” or p.60 “NetWare 4.x, 5/5.1 - Advanced Settings”.
Note
❒ This section assumes that NetWare is functional and that the necessary envi-
ronment for NetWare Print Services is available.
❒ If you configure the Network Interface Board in a NetWare environment us-
ing the NIB Setup Tool, you should install the client software released from
Novell in the following cases.
• Windows 95/98/Me in NDS mode configuration
• Windows NT 4.0 in NDS mode configuration
• Windows NT 4.0 in Bindery mode configuration
• Windows 2000 in NDS mode configuration
• Windows 2000 in Bindery mode configuration
A
AA
A
Log on to the Netware file server or the NDS tree as an Admin or Admin
equivalent.
B
BB
B
Run the NIB Setup Tool.
Reference
See p.50 “Running the NIB Setup Tool” .
C
CC
C
Click [Wizard] and click [OK].
The [NIB Setup Tool - Network board list] dialog box of the Network Interface
Board appears.
D
DD
D
Click [IPX protocol].
E
EE
E
Click to select the IPX address of the Network Interface Board you are con-
figuring, and then click [Next >].
Note
❒ If you do not know which Network Interface Board you are configuring,
print a network configuration page to check the MAC address (Network
address).