Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 117
2
464-0 Paper
feeding
Feeding retry
number set-
ting (lower
drawer)
Plain
paper
ALL 5
<0-5>
M Sets the number of
times of the feeding
retry from the lower
drawer.
4
464-1 Others ALL 5
<0-5>
M4
465-0 Paper
feeding
Feeding retry
number set-
ting (PFP
upper drawer)
Plain
paper
ALL 5
<0-5>
M Sets the number of
times of the feeding
retry from the PFP
upper drawer.
4
465-1 Others ALL 5
<0-5>
M4
466-0 Paper
feeding
Feeding retry
number set-
ting (PFP
lower drawer)
Plain
paper
ALL 5
<0-5>
M Sets the number of
times of the feeding
retry from the PFP
lower drawer.
4
466-1 Others ALL 5
<0-5>
M4
467-0 Paper
feeding
Feeding retry
number set-
ting (bypass
feed)
Plain
paper
ALL 5
<0-5>
M Sets the number of
times of the feeding
retry from the bypass
tray.
4
467-1 Others ALL 5
<0-5>
M4
468-0 Paper
feeding
Feeding retry
number set-
ting (LCF)
Plain
paper
ALL 5
<0-5>
M Sets the number of
times of the feeding
retry from the LCF.
4
468-1 Others ALL 5
<0-5>
M4
470 Paper
feeding
Paper size (305x457 mm)
feeding/widthwise direction
ALL 457/305
<148-
457/105-
305>
M10
471 Paper
feeding
Paper size (Post card)
feeding/widthwise direction
ALL 148/100
<148-
432/100-
297>
M * Post card is sup-
ported only for JPN
model.
10
478 Laser Judged number of polygo-
nal motor rotation error
(Normal rotation)
ALL 0
<0-1>
M Displays the error
[CA10] when the set
number of rotation error
has been detected.
0: 2 times
1: 12 times
1
479 Laser Judged number of polygo-
nal motor rotation error (At
acceleration/deceleration)
ALL 0
<0-1>
M 0: Waiting time for
polygonal motor
rotation overshoot-
ing 0.6 sec.
1: Waiting time for
polygonal motor
rotation overshoot-
ing 2.2 sec.
1
480 Paper
feeding
Default setting of paper
source
PPC 0
<0-5>
SYS 0: A4/LT
1: LCF
2: Upper drawer
3: Lower drawer
4: PFP upper drawer
5: PFP lower drawer
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e