Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c DATA CLONING with USB STORAGE DEVICE
9 - 11
9
[B] Data cloning procedure (Restore)
Important:
• The file system for the USB storage device should be in the FAT format. Note that any device
formatted in FAT32 or NTFS will not be operated. Its file system can be confirmed by opening
the properties of the device from Windows Explorer.
• Never turn the power of the equipment OFF during data cloning, or the data could be dam-
aged and the operation not carried out properly.
(1) Shut down the equipment.
(2) Connect the USB storage device to the USB connector (host) on the SYS board.
Fig. 9-15
USB connector
(
host
)
USB storage device
05/11