Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 157
2
1451 Network Password for IPP authenti-
cation
ALL - - This should be the
password of the
account at the time IPP
authentication was per-
formed.
12
1464 Network Samba server ON/OFF
setting
ALL 1
<1-4>
NIC 1: Samba enabled
2: Samba disabled
3: Print Share disabled
4: File Share disabled
12
1468 General User data management
limitation setting
ALL
(color)
0
<0-1>
SYS 0: Disabled
1: Enabled
1
1469 General User data management
limitation Setting by num-
ber of printouts
ALL
(color)
0
<7 digits>
SYS 0-9,999,999:
0-9,999,999 sheets
1
1470
General
Device authentication func-
tion setting
ALL 0
<0-1>
SYS 0: OFF
1: ON
1
1471
General
User authentication
method
ALL 0
<0-5>
SYS 0: Local
1: NTLM (NT Domain)
2: LDAP
3: Kerberos (Active
Directory)
4: Netware
1
1472
General
User data management
automatic registration func-
tion setting
ALL 0
<0-1>
SYS 0: Disabled
1: Enabled
1
1473
General
User data management
limitation setting
ALL
(black)
0
<0-1>
SYS 0: Disabled
1: Enabled
1
1474
General
User data management
limitation Setting by num-
ber of printouts
ALL
(black)
0
<7 digits>
SYS 0-9,999,999:
0-9,999,999 sheets
1
1476
Network
Restriction on Address
book operation by adminis-
trator
ALL 0
<0-1>
SYS Some restrictions can
be given on the admin-
istrator for operating the
Address book.
0: No restriction
1: Can be operated
only under the
administrator's
authorization
1
1477
Network
Restriction on "To" ("cc")
address
ALL 0
<0-3>
SYS 0: No restriction
1: Can be set from
both of the Address
book and LDAP
server
2: Can be set only
from the Address
book
3: Can be set only
from the LDAP
server
1
1478 User
interface
Display of paper size set-
ting by installation opera-
tion of drawers
ALL JPN: 0
UC: 1
<0-1>
SYS 0: Not displayed
1: Displayed
1
1479 User
interface
Default setting of sharp-
ness
ALL 5
<1-9>
SYS 1: -4 2: -3
3: -2 4: -1
5: 0 6: +1
7: +2 8: +3 9: +4
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e
05/11