Filter
Top Products
e-STUDIO281c/351c/451c ADJUSTMENT June 2005 © TOSHIBA TEC
3 - 8
3.4.2 Paper alignment at the registration roller
The aligning amount is adjusted by using the following codes in Adjustment Mode (05).
Sub-code
Notes:
1. Long size: 330 mm or longer (13.0 inches or longer)
Middle size: 220-329 mm (8.7-12.9 inches)
Short size: 219 mm or shorter (8.6 inches or shorter)
Short size 1: 205-219 mm (8.1-8.6 inches or shorter)
Short size 2: 204 mm or shorter (8.0 inches or shorter)
2. The adjustment of “Post card” is for Japan only.
<Procedure>
Note: Note:
If the aligning amount is too large, abnormal noise (paper-folding noise) or actual paper folding
may occur during paper feeding. If the aligning amount is too small, on the other hand, a skew,
an image dislocation in feeding direction or a paper exit jam (E010) may occur. Pay attention to
the above and select the appropriate value.
Paper type Weight
Upper
drawer
Lower
drawer
PFP
upper
drawer
PFP
lower
drawer
LCF ADU
Bypass feed
Black Color
Plain paper
64-80 g/m
2
17-20 lb.
450 (*4) 452 (*4) 448 (*4) 449 (*4) 457 455 (*1) 458 (*1)
Thick
paper 1
81-105 g/m
2
21-28 lb.
469 (*4) 470 (*4) 471 (*4) 472 (*4) 473 474 (*1) 460 (*1)
Thick
paper 2
106-163 g/m
2
29-43 lb.
------461
(*1)
475
(*3)
Thick
paper 3
164-209 g/m
2
44-55 lb.
------462
(*2)
475
(*3)
OHP film - ------463
(*1)
475
(*3)
(*1) 0: Long size 1: Middle size 2: Short size
(*2) 0: Long size 1: Middle size 2: Short size 3: Post card
(*3) 0: Long size of thick paper 2 1: Middle size of thick paper 2
2: Short size of thick paper 2 3: Long size of thick paper 3
4: Middle size of thick paper 3 5: Short size of thick paper 3
6: Long size of OHP film 7: Middle size of OHP film
8: Short size of OHP film 9: Post card
(*4) 0: Long size 1: Middle size 2: Short size 1 3: Short size 2
(*5) 1:
3:
55:
56:
57:
58:
59:
60:
Single-sided grid pattern in Black Mode
Double-sided grid pattern in Black Mode
Grid pattern of thick paper 2 in Full Color Mode
Grid pattern of thick paper 3 in Full Color Mode
Grid pattern of OHP film in Full Color Mode
Single-sided grid pattern of thick paper 2 in Black Mode
Single-sided grid pattern of thick paper 3 in Black Mode
Single-sided grid pattern of OHP film in Black Mode
(
Code
)
[
START
]
(
Sub-code
)[
START
]
[
0
][
5
]
[
Power
]
Current value
displayed
Enter new
value
[
POWER
]
OFF/ON
(
Exit
)
[
Drawer
selection
]
(
*5
)
+
[
FAX
]
(
Test print
)
[
SET
]
or
[
INTERRUPT
]
Stores in memory
(
Not necessary for LCF
)