Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 153
2
1380 Image
process-
ing
Fuser roller printing tem-
perature time accumulating
counter
ALL 0
<8 digits>
M Counts up the heater
control time accumu-
lated (during printing).
When the counter value
of the fuser belt is
cleared, this counter
value is also cleared in
sync at PM support
mode.
2
1382 Image
process-
ing
Fuser roller energy saving
temperature time accumu-
lating counter Display/0
clearing
ALL 0
<8 digits>
M Counts up the heater
control time accumu-
lated (at energy saving
mode). When the
counter value of the
fuser belt is cleared,
this counter value is
also cleared in sync at
PM support mode.
2
1385 Image
process-
ing
Number of output pages
(Thick paper 1)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON. When the counter
value of the fuser belt is
cleared, this counter
value is also cleared in
sync at PM support
mode.
1
1386 Image
process-
ing
Number of output pages
(Thick paper 2)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON. When the counter
value of the fuser belt is
cleared, this counter
value is also cleared in
sync at PM support
mode.
1
1387 Image
process-
ing
Number of output pages
(Thick paper 3)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON. When the counter
value of the fuser belt is
cleared, this counter
value is also cleared in
sync at PM support
mode.
1
1388 Image
process-
ing
Number of output pages
(OHP film)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON. When the counter
value of the fuser belt is
cleared, this counter
value is also cleared in
sync at PM support
mode.
1
1389 Main
charger
Main charger wire clean-
ing counter display/0 clear-
ing
ALL 0
<5 digits>
M Does not count up
when cleaning is not
effective.
1
1390 Paper
feeding
Feeding retry counter
(upper drawer)
ALL 0
<8 digits>
M Counts the number of
times of the feeding
retry from the upper
drawer.
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e