Filter
Top Products
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE June 2005 © TOSHIBA TEC
2 - 44
254 Transfer 2nd transfer
roller bias out-
put voltage
-Low ALL -500
<-9999-
0>
M Transformer output set-
ting of the 2nd transfer
roller bias (minus out-
put).
When replacing the
high-voltage trans-
former, the values listed
in attached data sheet
are entered.
(Unit: V)
1
255 -High ALL -2000
<-9999-
0>
M1
270 Transfer Temperature/humidity sen-
sor Temperature display
ALL 23
<0-100>
M The temperature of the
inside of the equipment
is displayed.
[Unit: °C]
2
275 Transfer 2nd transfer
roller bias
actual value
(When clean-
ing the roller)
(+) ALL 147
<0-255>
M Displays the value of
2nd transfer roller bias
when printing is oper-
ated.
2
276 (-) ALL 229
<0-255>
M2
277-0 Transfer 2nd transfer
roller bias
actual value
display (Plain
paper)
Single
side
ALL
(black)
159
<0-187>
M Displays the value of
2nd transfer roller bias
when printing is oper-
ated.
10
277-1 Reverse
side at
duplexing
ALL
(black)
134
<0-187>
M10
277-2 Single
side
ALL
(color)
147
<0-187>
M10
277-3 Reverse
side at
duplexing
ALL
(color)
128
<0-187>
M10
279-0 Transfer 2nd transfer
roller bias
actual value
display (Thick
paper 1)
Single
side
ALL
(black)
144
<0-187>
M Displays the value of
2nd transfer roller bias
when printing is oper-
ated.
10
279-1 Reverse
side at
duplexing
ALL
(black)
119
<0-187>
M10
279-2 Single
side
ALL
(color)
125
<0-187>
M10
279-3 Reverse
side at
duplexing
ALL
(color)
112
<0-187>
M10
281 Transfer 1st transfer roller bias
resistance detection con-
trol
ALL -
<0-255>
M The RMS value of the
main charger grid bias
is displayed..
2
284 Transfer Transfer belt cleaning unit
contact timing adjustment
ALL 141
<88-168>
M When the value
increases, the contact
timing of transfer belt
cleaning unit is delayed.
1
285 Transfer Transfer belt cleaning unit
release timing adjustment
ALL 121
<88-168>
M When the value
increases, the release
timing of transfer belt
cleaning unit is delayed.
1
290-0 Transfer 2nd transfer roller bias off-
setting adjustment
(Thick paper 2)
ALL
(black)
153
<0-187>
M Displays the value of
2nd transfer roller bias
when printing is oper-
ated.
10
290-1 ALL
(color)
150
<0-187>
M10
Adjustment mode (05)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e