Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ADJUSTMENT
3 - 39
3
3.6.4 Color balance adjustment (Color Mode)
The color balance is adjusted by adjusting the density of each color. The adjustment is performed by
selecting its density area from the following: low density, medium density and high density.
<Adjustment Mode (05)>
Note: Note:
Be sure that this adjustment be made after performing “3.6.1 Automatic gamma adjustment”.
<Procedure>
Procedure is same as that of "3.6.3 Gamma balance adjustment".
3.6.5 Adjustment of smudged/faint text
The smudged/faint text at the Black Mode is adjusted.
<Adjustment Mode (05)>
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the codes to be adjusted and press the [START] button.
(3) Key in the adjustment value. (To correct the value once keyed in, press [CLEAR] button.)
(4) Press the [ENTER] or [INTERRUPT] button to store the value in memory. ? The equipment goes
back to the ready state.
(5) For resetting the value, repeat step (2) to (4).
(6) Let the equipment restart and perform printing job.
(7) If the desired image has not been attained, repeat step (1) to (6).
Color
PS PCL
Density Remarks600x600dpi 1200x600dpi 600x600dpi 1200x600dpi
Smooth Detail Smooth Detail Smooth Detail Smooth Detail
Yellow 1010-0 1014-0 1018-0 1022-0 1026-0 1030-0 1034-0 1038-0 Low The larger
the value
is, the
darker the
color to be
adjusted
becomes.
Acceptable
values:
0 to 255.
(Default:
128)
1010-1 1014-1 1018-1 1022-1 1026-1 1030-1 1034-1 1038-1 Medium
1010-2 1014-2 1018-2 1022-2 1026-2 1030-2 1034-2 1038-2 High
Magenta 1011-0 1015-0 1019-0 1023-0 1027-0 1031-0 1035-0 1039-0 Low
1011-1 1015-1 1019-1 1023-1 1027-1 1031-1 1035-1 1039-1 Medium
1011-2 1015-2 1019-2 1023-2 1027-2 1031-2 1035-2 1039-2 High
Cyan 1012-0 1016-0 1020-0 1024-0 1028-0 1032-0 1036-0 1040-0 Low
1012-1 1016-1 1020-1 1024-1 1028-1 1032-1 1036-1 1040-1 Medium
1012-2 1016-2 1020-2 1024-2 1028-2 1032-2 1036-2 1040-2 High
Black 1013-0 1017-0 1021-0 1025-0 1029-0 1033-0 1037-0 1041-0 Low
1013-1 1017-1 1021-1 1025-1 1029-1 1033-1 1037-1 1041-1 Medium
1013-2 1017-2 1021-2 1025-2 1029-2 1033-2 1037-2 1041-2 High
Language
Remarks
PS PCL
654 655 When the value increases, the smudged text is improved.
When the value decreases, the faint text is improved.
Acceptable values: 0 to 9 (Default: 5)