Filter
Top Products
e-STUDIO281c/351c/451c TROUBLESHOOTING June 2005 © TOSHIBA TEC
5 - 64
[CC80] Front jogging motor abnormality/Front aligning plate motor abnormality
MJ-1022 (Front jogging motor abnormality)
Is the front jogging plate home position sensor (S6) working properly?
È
NO Æ Replace the sensor.
YES
Is the wiring between the finisher controller PC board and front jogging motor (M3) correct?
È
NO Æ Correct the wiring.
YES
Has the rack run over the stopper of the roll?
È
YES Æ Fix it.
NO
1) Replace the front jogging motor.
2) Replace the finisher controller PC board.
MJ-1023/1024 (Front aligning plate motor abnormality)
Is the front aligning plate home position sensor (PI36) normal?
È
NO Æ Replace the sensor.
YES
Is the wiring between the finisher controller PC board and the front aligning plate motor (M33)
correct?
È
NO Æ Correct the wiring.
YES
Is there any mechanical problem with the path of aligning plate?
È
NO Æ Fix the mechanism.
YES
1) Replace the front aligning plate motor.
2) Replace the finisher controller PC board.