Filter
Top Products
e-STUDIO281c/351c/451c ADJUSTMENT June 2005 © TOSHIBA TEC
3 - 24
(1) While pressing the digital keys [0] and [5] simultaneously, turn the power ON. -> (Adjustment
Mode)
(2) Print out the test pattern and adjust its deviation amount (above). Use the image position of
magenta (M) as a reference for adjustment. The image positions of yellow (Y), cyan (C) and
black (K) must be adjusted with this reference.
• Select A3/LD size. Key in “63” and then press the [FAX] button. -> 2 pages of the test pattern
are printed out.
• Check the image of the test pattern (above) and specify the color to be adjusted.
• Key in the code (listed above) and press the [START] button.
• Key in the sub code of the color to be adjusted and press the [START] button.
Sub code 0: Black (K) 1: Cyan (C) 3: Yellow (Y)
• Key in the adjustment value and press the [ENTER] or [INTERRUPT] button.
Notes:
1. When the value increases by “1”, the image shifts toward the trailing edge of the paper by
0.0423 mm.
2. Adjust the image positions of black (B), cyan (C) and yellow (Y) to align the leading/trailing
edge of each image. If both leading and trailing edges are not aligned, adjust the deviation
amount of each edge so that it is uniformed.
(3) Repeat Step (2) until all the test patterns are printed correctly.
Notes:
1. Since the adjusted value is reflected to that of the subsequent steps, be sure to perform the
rest of adjustment.
2. Print out the test pattern for each adjustment.
(4) Turn the power OFF.
<Adjustment procedures (for A4/LT size paper)>
Use “Test pattern 68” for the adjustment method to adjust a color deviation.
* Perform this adjustment after <Adjustment procedures (for A3/LD size paper)> is performed.
This adjustment should be applied for each printout of the test pattern. (Skip this if the test pattern is
printed correctly.)
The order of the adjustment, test patterns and codes to be used are listed below.
(1) While pressing the digital keys [0] and [5] simultaneously, turn the power ON. -> (Adjustment
Mode)
Order Test pattern Code
1 1st page 953
2 2nd page 954
3 3rd page 955
4 4th page 956