Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 27
2
[5]
A LCF end fence home position sensor Fence home posi-
tion
Other than home
position
B LCF end fence stop position sensor Fence stop position Other than stop
position
C Empty sensor at LCF standby side No paper Paper present
D LCF side cover open/close switch Cover closed Cover opened
E LCF motor rotation status (Motor is rotating at
output mode (03))
Abnormal rotation Normal rotation
F LCF tray-up sensor Tray at upper limit
position
Other than upper
limit position
G LCF feed sensor No paper
Paper present
H Empty sensor at LCF feed side No paper Paper present
[6]
A Lower drawer detection switch Drawer not installed Drawer present
B Upper drawer detection switch Drawer not installed Drawer present
C Lower drawer paper stock sensor Paper almost empty Paper present
D Upper drawer paper stock sensor Paper almost empty Paper present
E Lower drawer empty sensor No paper Paper present
F Upper drawer empty sensor No paper Paper present
G Lower drawer tray-up sensor Tray at upper limit
position
Other than upper
limit position
H Upper drawer tray-up sensor Tray at upper limit
position
Other than upper
limit position
[7]
A-
--
B-
--
C-
--
D-
--
E Side cover open/close switch Cover opened Cover closed
F Front cover opening/closing switch Cover opened Cover closed
G-
--
H Exit sensor Paper present No paper
[8]
A Bypass feed paper width sensor 3
(Refer to table1)
Bit 1 Bit 0
B Bypass feed paper width sensor 2
(Refer to table1)
Bit 1
Bit 0
C Bypass feed paper width sensor 1
(Refer to table1)
Bit 1
Bit 0
D Bypass feed paper width sensor 0
(Refer to table1)
Bit 1
Bit 0
E Bypass sensor No paper Paper present
F ADU opening/closing switch ADU opened ADU closed
G ADU exit sensor Paper present No paper
H ADU entrance sensor Paper present No paper
Digital
key
Button Items to check
Contents
Highlighted display
e.g.
Normal display
e.g.