Filter
Top Products
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE June 2005 © TOSHIBA TEC
2 - 172
Note: Note:
In this equipment, a toner image is formed on the transfer belt prior to a paper feeding.
When the feeding retry occurs and the transport timing is delayed, the toner image on the trans-
fer belt is cleaned off without the 2nd transfer since the paper cannnot be reached for the 2nd
transfer proccess.
After that, the toner image fomation is retried while the paper is waited.
In this case, the toner for this image formation is consumed wastefully since the toner image on
the transfer belt is already cleaned off, even though the printing is normally completed.
Therefore, note that the excessive toner will be consumed consequently when the upper limit
value of feeding retry counter is set larger or set as "0" (no limit).
The toner is also consumed wastefully when the paper misfeeding occurs. Replace the roller at
earlier timing if the paper misfeedings have occurred frequently.
1955
Network
BDC2 of user authentica-
tion
ALL - UTY
Maximum 128 letters
12
1956
Network
PDC3 of user authentica-
tion
ALL - UTY
Maximum 128 letters
12
1957 Network BDC3 of user authentica-
tion
ALL - UTY
Maximum 128 letters
12
1958
Network
PDC of device authentica-
tion
ALL -
UTY Maximum 128 letters
12
1959
Network
BDC of device authentica-
tion
ALL - UTY
Maximum 128 letters
12
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e
05/11