Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 53
2
430 Image Top margin adjustment
(blank area at the leading
edge of the paper))
PPC 26
<0-255>
M When the value
increases by “1”, the
blank area becomes
wider by approx.
0.0423 mm.
1
431 Image Left margin adjustment
(blank area at the left of the
paper along the paper
feeding direction)
PPC 0
<0-255>
M1
432 Image Right margin adjustment
(blank area at the right of
the paper along the paper
feeding direction)
PPC 15
<0-255>
M1
433 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper)
PPC 43
<0-255>
M1
434-0 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper)
/Reverse side at duplexing
PPC/
PRT
EUR: 45
UC: 28
JPN: 28
Others:
45
<0-255>
M4
434-1 Image Right margin adjustment
(blank area at the right of
the paper along the paper
feeding direction)
/Reverse side at duplexing
PPC/
PRT
18
<0-255>
M4
435 Image Top margin adjustment
(blank area at the leading
edge of the paper)
PRT 24
<0-255>
M1
436 Image Left margin adjustment
(blank area at the left of the
paper along the paper
feeding direction)
PRT 0
<0-255>
M When the value
increases by “1”, the
blank area becomes
wider by approx.
0.0423 mm.
1
437 Image Right margin adjustment
(blank area at the right of
the paper along the paper
feeding direction)
PRT 0
<0-255>
M1
438 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper)
PRT 0
<0-255>
M1
439 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper along
the paper feeding direc-
tion) when paper size is not
specified at bypass feed
ALL 128
<0-255>
M When the value
increases by “1”, the
margin increases by
approx. 0.2 mm.
1
440 Laser Secondary
scanning
laser writing
start position
Upper
drawer
ALL 21
<0-40>
M When the value
increases by “1”, the
image shifts toward the
trailing edge of the
paper by approx.
0.2 mm.
1
441 Lower
drawer
ALL 47
<0-80>
M1
442 Bypass
feeding
ALL 22
<0-40>
M1
443 LCF ALL 20
<0-40>
M1
444 PFP ALL 20
<0-40>
M1
445 Duplex
feeding
ALL 21
<0-40>
M1
Adjustment mode (05)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e