Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ADJUSTMENT
3 - 33
3
3.5.11 Adjustment of smudged/faint text
The smudge/faint text at a Black Mode can be set at the following codes.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment.
Note: Note:
Remember the image specifications and life span of the replacing parts may not meet the stan-
dard when the setting value is changed from the default value.
<Procedure>
Procedure is same as that of "3.5.3 Density adjustment".
3.5.12 Adaptation to highlighter
Four modes of one touch adjustment are performed and each mode can be switched into two modes;
highlighter 1 or 2. This adjustment is performed when the reproduction mode for highlighter is needed.
<Adjustment Mode (05)>
Note: Note:
The color may not always be reproduced precisely due to the characteristics of fluorescent ink.
Original mode
Item to be adjusted Remarks
Text/Photo
648 Adjustment of
smudged/ faint text
When the value increases, the faint
text is improved. When the value
decreases, the smudged text is
improved.
Acceptable values: 0 to 255.
(Default: 30)
Code One touch adjustment Remarks
1769 Vivid 0: Default (Vivid / Clear / Warm / Cool)
1: Highlighter 1
2: Highlighter 2
1770 Clear
1771 Warm
1772 Cool