Filter
Top Products
Performing Basic Network Configuration
88 AlterPath KVM/net Installation, Administration, and User’s Guide
1. Review the values of all the network configuration parameters, as shown
in the following screen example. The values shown are for example only.
2. Enter y if the values shown are correct, or press Enter.
3. The following prompt appears when “y” is entered.
4. Enter y to save the changes.
5. To confirm the configuration, enter the ifconfig command.
6. The new network parameters display.
7. Log out from the terminal session.
8. In a HyperTerminal application on a Windows PC, go to “File > Exit”.
9. If performing a first-time installation, go to “Completing Configuration
Using the Web Manager” on page 98.
Current configuration:
Hostname : kvm
DHCP : disabled
System IP : 192.168.45.32
Domain name : cyclades.com
drwxr-xr-x 1 root
Primary DNS Server :
192.168.44.21
Gateway IP : 198.168.44.1
Network Mask : 255.255.252.0
Are all these parameters
correct? (y/n) [n] :
Are all the parameters correct? (y/n)[n]: y
Do you want to save your configuration to Flash?
(y/n)[n]: y