Filter
Top Products
Web Manager for Administrators 157
Wizard Mode
Step 4: System Log [Wizard]
In Wizard mode, selecting “Step 4: System Log” brings up a form for
identifying one or more syslog servers to receive syslog messages from the
KVM/net.
Figure 4-8:System Log in Wizard Mode
Before performing this procedure, make sure an already-configured syslog
server is available to the KVM/net.
Obtain the following information from the syslog server’s administrator:
• The IP address of the syslog server
• The facility number for messages coming from the KVM/net
Each syslog server has eight local facility numbers (Local 0 through Local 7)
that the syslog server’s administrator can assign and use for handling log
messages from different locations. See “Syslog Servers” on page 54, if
needed, for more background on logging and on how facility numbers are
used.