Filter
Top Products
451
Rack or Cabinet Placement
Rack or Cabinet Placement
When installing Cyclades equipment in a rack or cabinet, observe the
following precautions:
• Ensure that the floor’s surface is level.
• Load equipment starting at the bottom first and filling the rack or cabinet
from the bottom to the top.
• Exercise caution to ensure that the rack or cabinet does not tip during
installation and use an anti-tilt bar.
Table Placement
• Choose a desk or table sturdy enough to hold the equipment.
• Place the equipment so that at least 50% of the equipment is inside the
table or desk’s leg support area to avoid tipping of the table or desk.
Safety Guidelines for Rack-Mounting the KVM/
net
Note: Each heading and its contents in this section is also provided in German
(Deutsch) in italics immediately following the English.
The following considerations should be taken into account when rack-
mounting the AlterPath KVM/net.
Folgendes sollte beim Rack-Einbau des AlterPath KVM/net berücksichtigt werden.
Temperature
The manufacturer's maximum recommended ambient temperature for the
AlterPath KVM/net is 122 ºF (50 ºC).