Filter
Top Products
Advanced Installation Procedures 125
Installing the AlterPath KVM Expander
T To Power On the KVM Expander
1. Make sure the KVM Expander’s power switch is off.
The power is off when the side of the power switch with the circle is
pressed down.
2. Plug in the power cable.
3. Turn the KVM Expander’s power switch on.
T To Power On Devices Daisy Chained to the KVM Expander’s
Power Outlet
1. Make sure the KVM Expander’s power switch is off.
The power is off when the side of the power switch with the circle is
pressed down.
2. Plug the power cable of a device in the power outlet located on the back
right of the KVM Expander.
3. Turn the KVM Expander’s power switch on.
T To Power On KVM-connected Devices
Do this after “Connecting Servers to the KVM Ports” on page 78.
• Turn on the power switches of the connected computers and devices.
Power connector Power outlet
Power switch