Cyclades User's Guide Switch User Manual


 
Web Manager for Administrators 219
Configuration
T To Identify a TACACS+ Authentication Server
Perform this procedure to identify the authentication server when the KVM/
net or any of its ports is configured to use the TACACS+ authentication
method or any of its variations (Local/TACACS+, TACACS+/Local, or
TACACS+/DownLocal).
1. Go to Configuration>Authentication>TACACS+ in Expert mode.
The TACACS+ form appears.
Figure 4-29:Tacacs+ Server Authentication Form
2. Fill in the form according to your local setup of the TACACS+ server or
servers.
3. To apply “Authorization” in addition to authentication to the box and
ports, select the “Enable Raccess Authorization” check box.
By default “Raccess Authorization” is disabled, and no additional
authorization is implemented. When “Raccess Authorization” is enabled,
the authorization level of users trying to access KVM/net or its ports using
TACACS+ authentication is checked. Users with administrator privileges