Cyclades User's Guide Switch User Manual


 
Web Manager for Administrators 269
Configuration
With the System form administrators can set the time and date on the KVM/
net and reboot the KVM/net if necessary. The following procedures are
available on the System form:
“Creating a Custom Timezone Selection” on page 272
“To Set The Time and Date With NTP” on page 270
“Boot Configuration” on page 273
“To Configure KVM/net Boot” on page 276
Time/Date
Selecting Configuration > System > Time/Date in Expert mode brings up the
form shown in the following figure.
You can use the Time/Date form in Expert mode to set the KVM/net’s time
and date in one of the following two methods.
Configuring manually by entering the time and date in the form
Configuring using the NTP server
Enabling Network Time Protocol (NTP) synchronizes the KVM/net’s
system clock with an NTP server, which maintains the true time (the
average of many high-accuracy clocks around the world).
Setting up a customized timezone configuration